Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面


Transactions of Nonferrous Metals Society of China

Vol. 19    Special 2    September 2009

[PDF Download]        [Flash Online]


Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming
LI Yi(李 毅), WANG Zhong-Jin(王忠金)

School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China

Abstract:The static dent resistance performance of the aluminum alloy double-curved panel formed using viscous pressure forming (VPF) was studied by finite element analysis, which mainly considers the forming process conditions. The whole simulation consisting of three stages, i.e., forming, spring-back and static dent resistance, was carried out continuously using the finite element code ANSYS. The influence of blank holder pressure (BHP) and the drawbead on the stiffness and the static dent resistance of the panels formed using VPF was analyzed. The results show that the adequate setting of the drawbead can increase the plastic deformation of the double-curved panel, which is beneficial to the initial stiffness and the static dent resistance. There is an optimum BHP range for the stiffness and the static dent resistance.


Key words: aluminum alloy; double-curved panel; viscous pressure forming; panel stiffness; static dent resistance; finite element analysis

ISSN 1004-0609
CN 43-1238/TG

ISSN 1003-6326
CN 43-1239/TG

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱