Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面


Transactions of Nonferrous Metals Society of China

Vol. 23    No. 2    February 2013

[PDF Download]        


Influence of particle size on property of Ti-6Al-4V alloy prepared by high-velocity compaction
Zhi-qiao YAN1,2, Feng CHEN1, Yi-xiang CAI1, Jian YIN2

1. Department of Powder Metallurgy, Guangzhou Research Institute of Nonferrous Metals, Guangzhou 510650, China;
2. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 41

Abstract:Three Ti-6Al-4V alloy powders with median diameters of 103, 66 and 44 μm, respectively, were pressed by high-velocity compaction (HVC) technology and then sintered in vacuum. The effects of particle sizes on forming as well as properties of sintered samples were investigated. The results show that fine powders are more difficult to press than coarse powders and its compact density is lower too. But the sintered density of fine powders is obviously higher than that of coarse powders. Compared with the powders with 103 and 66 μm in diameter, the green density with 44 μm diameter powders is lower, which is 85.1% of theoretical density (TD) at an impact energy of 913 J. After sintering at 1300 °C for 2.5 h, the sintered density of the compacts with 44 μm diameter powders is the highest, and reaches 98.2% of TD. Moreover, the sintered sample with 44 μm in diameter has the highest hardness and compressive strength, which are HV 354 and 1265 MPa, respectively.


Key words: Ti-6Al-4V; high-velocity compaction (HVC); green density; sintering

ISSN 1004-0609
CN 43-1238/TG

ISSN 1003-6326
CN 43-1239/TG

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱