Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面


Transactions of Nonferrous Metals Society of China

Vol. 31    No. 12    December 2021

[PDF Download]        


Comparison of wear behaviour of LM13 Al-Si alloy based composites reinforced with synthetic (B4C) and natural (ilmenite) ceramic particles
Rahul GUPTA1, Tarun NANDA1, O. P. PANDEY2

1. Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala 147004, Punjab, India;
2. School of Physics and Materials Science, Thapar Institute of Engineering and Technology, Patiala 147004, Punjab, India

Abstract:Dry sliding wear behaviour of stir-cast aluminium matrix composites (AMCs) containing LM13 alloy as matrix and ceramic particles as reinforcement was investigated. Two different ceramic particle reinforcements were used separately: synthetic ceramic particles (B4C), and natural ceramic particles (ilmenite). Optical micrographs showed uniform dispersion of reinforced particles in the matrix material. Reinforced particles refined the grain size of eutectic silicon and changed its morphology to globular type. B4C reinforced composites (BRCs) showed maximum improvement in hardness of AMCs. Ilmenite reinforced composites (IRCs) showed maximum reduction in coefficient of friction values due to strong matrix-reinforcement interfacial bonding caused by the formation of interfacial compounds. Dry sliding wear behaviour of composites was significantly improved as compared to base alloy. The low density and high hardness of B4C particles resulted in high dislocation density around filler particles in BRCs. On the other hand, the low thermal conductivity of ilmenite particles resulted in early oxidation and formation of a tribo-layer on surface of IRCs. So, both types of reinforcements led to the improvement in wear properties of AMCs, though the mechanisms involved were very different. Thus, the low-cost ilmenite particles can be used as alternative fillers to the high-cost B4C particles for processing of wear resistant composites.


Key words: aluminium matrix composites; ilmenite; boron carbide; particle-reinforcement; wear test; tribolayer; XRD analysis; SEM-EDS

ISSN 1004-0609
CN 43-1238/TG

ISSN 1003-6326
CN 43-1239/TG

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱